Installation instructions
With each Lappset product we attach clear asembly and installation instructions. Components are clearly numbered in order to make the installation as easy as possible. In the illustrated installation instructions you will find all the necessary information regarding frame connections, assembly of wall elements, panels, roofs and the installation of the structural elements such as posts, bars, nets, suspension bridges, stairs and slides.
Elevation and footing depths of the equipment must follow the work description. The vertical parts must be vertical and the horizontal parts must be horizontal otherwise certain planned inclinations in the equipment may be against safety norms. If the minimum use zones mentioned in the installation instructions are not followed, the installer may have to accept the consequences of this negligence and compensate any injuries sustained in the minimum use zones.
Mounting
As standard, the playground equipment is installed on underground foundations. Alternatively, the equipment can be surface mounted. Please specify when placing the order if you wish to opt for surface mounting.
Some equipment can be installed in a fixed manner using anchoring parts that must be ordered separately. The traditional use of concrete foundations is only required in certain cases. Please contact us if you are concerned with the conditions of the ground when installing the equipment.
Basis
According to the EN standards, playground equipment must be assembled on a surface the critical fall height of which corresponds to the fall height of the equipment. If loose materials, such as sand with a grain size of 0.2–2 mm or gravel with a grain size of 2–8 mm, are used, the required layer thickness varies between 25 and 40 cm. The safety tiles, which are made of bonded rubber shred, present an easy-to-clean option for a safe floor material. Elements can be assembled on top of grass, as long as their critical fall height does not exceed 1 m. More detailed information on safe floor materials will be supplied with the assembly instructions.
Comissioning of the playgroung
Before using the play area, a handover inspection should be performed. The handover inspection, log book and assembly instructions accompanying the order confirmation or delivery are provided to facilitate the inspection into the safety of the play area and to see the facility has been correctly installed. Any missing items or transport damage should be reported when unpacking the delivery and within 14 days from receipt of the products. Please remember the play area should not be used until the site is completed and is safe!
|
|
|